Dustless Technologies

Dustless Technologies
Share

Dustless Technologies

 •  November 7, 2014

The AshVac Filter Package (Part #2F22) comes with an inner and outer filter and fits our MU305, MU405 and A0500 ash vacuums. Here is some important information concerning the maintenance of these filters.The outer filter CANNOT be washed — it is made of fiberglass and treated with a chemical.1. Use an “air compressor” and a blower nozzle to clean2 ...

Dustless Technologies

 •  August 30, 2014

Recently, it has come to our attention that the clips (part # 12551) that hold down the lids to our wet/dry vacuums are failing in some cases. We have recently redesigned the lids to offer an improved opportunity to secure the clips. In the event you break the clips during installation, we will replace them at no charge. We apologize for any and ...

Dustless Technologies

 •  April 21, 2014

Dustless Technologies was featured recently in Home Improvement Executive magazine. The article was titled “Innovations in: Dust Collection Systems.” This article discusses dust control offerings from several companies, including Dustless, and mentions our newDustcontrol line about to be introduced in the USA. This line of mobile dust extractors ...

Dustless Technologies

 •  April 18, 2014

One of our new stocking dealers, Paradise Concrete Solutions, located in Paradise, PA, recently added a Dustless Product Display to their store. Their display consists of Dustless Vacuums and accessories and makes a great addition to any dealer inventory. Here is what Levi, from Paradise Concrete Solutions says: “Paradise concrete solutions is a ...

Dustless Technologies

 •  April 8, 2014

The BitBuddie dust shroud for drilling is able to capture dust and slurry created when DIYers or contractors are core drilling, using a percussion hammer or just cutting with a drywall saw. When attached to a Dustless vacuum, the suction is enough to keep the BitBuddie attached to a wall or ceiling hands-free, enabling the user to concentrate on ...

Dustless Technologies

 •  March 25, 2014

Here is a sample from one of our “Ask a Question” submissions. Quite often, a quick DIY fix can solve a simple problem. While setting up my #16006 Wet+Dry HEPA Vacuum, I put the wrong foot on the barrel base and punctured it with the screw. Can I fill the hole from underneath with 2-part epoxy?Answer: Good morning. Yes, I see no challenges with ...

Dustless Technologies

 •  March 17, 2014

We’ve always claimed that our DustBuddie Dust Shroud is nearly unbreakable, since it’s made of a tough polycarbonate material. Well, here is a short video to show you what we’re talking about. We took a Jeep, weighing a ton and a half or more, and ran over a DustBuddie. The result … DustBuddie wins!! No cracks or damage whatsoever. What’s next? ...

Dustless Technologies

 •  March 10, 2014

Wall or floor sanding always creates a huge mess … dust and debris all over the floor and in the air. Makes for an unhealthy work environment. The Dustless Sander (Part # 50001), powered by your vacuum or by one of our vacuums, the Wet+Dry DustlessVac (Part # 16003), for example, is the ideal tool for maintaining an almost dust-free workplace. It ...