ENERPAC

ENERPAC
Share

ENERPAC

 •  January 10

Venturi valves improve the reaction speed of single-acting, spring and load return cylinders by up to three times. Venturi valves create a vacuum-like effect in a pump system; drawing the oil from the cylinder back to the pump’s reservoir at a much faster rate which increases the retraction speed of the plunger by up to three times. Venturi valves...

ENERPAC

 •  January 9

Our new Remote Hose Disconnector is designed to eliminate the release of hydraulic cylinder fluid into the sea during transition piece installation on offshore wind farms. The environmentally friendly development also allows full recovery of all connected equipment for reuse. Hydraulic cylinders are a key tool in the installation of the transition...

ENERPAC

 •  December 7, 2017

Our new Low-Height Skidding System is a modular system that can jack and slide heavy loads over a pre-constructed track. The Low-Height Skidding System is comprised of a series of skid beams moved by hydraulic push-pull units, travelling over a pre-constructed track. A series of special PTFE-coated pads are placed on the skid tracks to reduce...

ENERPAC

 •  November 16, 2017

Enerpac has set the control standard with the new generation of their multifunctional synchronous lifting system: the EVO-System – the evolutionary result of more than 25 years experience in specialised hydraulic engineering and lifting technology using digitally controlled hydraulics. This experience is available to all our customers who need...

ENERPAC

 •  November 16, 2017

Enerpac is proud to present the new W-Series UltraSlim hydraulic torque wrench cassettes. These tools were developed to provide customers with a simple, durable and productive controlled bolting solution for narrow access applications. UltraSlim cassettes combine the simplicity and durability of the trusted W-Series hydraulic torque wrenches, with...

ENERPAC

 •  November 16, 2017

Featuring a lightweight design, XC-Series pumps are a cost-effective solution for remote locations or hard-to-access areas. The combination of both speed and power also makes the XC-Series one of the safest, most ergonomic hydraulic pumps for everyday use. The addition of a double-acting manual valve option enables compatibility with either single...

ENERPAC

 •  November 16, 2017

Enerpac has completed testing of the world’s largest offshore gantry crane at its Hengelo manufacturing facility in the Netherlands. The crane will be used in the construction of a 5,400 m bridge for an offshore highway on Reunion Island by French consortium Bouygues Travaux Publics, VINCI Construction Grands Projets, Dodin Campenon Bernard and...

ENERPAC

 •  November 16, 2017

Enerpac has been awarded a contract to build the world’s largest, offshore overhead gantry crane for French consortium Bouygues Travaux Publics, VINCI Construction and Demathieu Bard Construction. The crane – with a lifting capacity of 4,800 Tonne – will be used to install the pre-cast viaduct columns for a new coastal highway around Reunion...

ENERPAC

 •  November 16, 2017

Enerpac is proud to introduce the Pow’R-LOCK™, a self-locking jack that performs automatic mechanical locking during lifting, lowering and holding. A patent-pending control system provides full-time automatic locking, securing the load regardless of cylinder movement and control cycle. No need to manually lock or release the load; the operator just...

ENERPAC

 •  November 16, 2017

Enerpac is pleased to announce the introduction of a new generation of controlled bolting tools: The X-Edition S-Series Square Drive, and W-Series Low Profile hydraulic torque wrenches. The X-Edition tools incorporate all the simplicity, reliability and quality of the trusted S and W-Series tools, with some exciting new features designed to help...